MountConverter.com

Quickly find another solution:and    

Fujifilm X body + Minolta SR/MD/MC lens

COMPATIBLE MF MA

The SR/MD/MC lenses can be easily adapted to Fujifilm X cameras.

The Minolta SR/MC/MC is an SLR system, which leaves enough spare space to mount it on a Fujifilm X body. The adapter ring consists of two parts: the SR/MD/MC bayonet lock and release lug, fixed with bolts on the black ring.

Find your adapter here:

Keep in mind that using a fullframe SR lens will get you a crop factor of 2*, because of the tiny sensor of the M4/3 body, you'll get a pretty high focal length multiplier (you'll get a smaller image frame). Find out more about focal length in this article if you're interested.

The Minolta interchangeable lens SLR system's lock is officially called SR (that's the name of its bayonet lock). The original version has been manufactured between 1958-1967, and the frames they were manufactured for didn't support either TTL photometry or automatic modes. The original version of the SR, the MC was released in 1966 was the first to support TTL photometry (the lock is still an SR!). The second version named MD was released in 1977 (this version was able to provide feedback on the lowest aperture setting. The bayonet lock is still an SR, thus all three lenses have basically the same fixture type (they had different features only on their originally intended cameras). Converting them to digital cameras the SR/MD/MC markings mean no difference and are fully compatible.

Have you found an error, or would you like to share some insight about an item? Feel free to mail it to us, we appreciate your help in improving the site.

Share this solution!

Terminology

In terms of compatibility, we distinguish four separate categories:

COMPATIBLE
PARTIALLY COMPATIBLE
COMPATIBLE IN THEORY
NOT COMPATIBLE
This means that you'll be able to apply the lens on the camera in question with a proper adapter, and full focus range will be available with it (often with aperture control too). If AF is supported, you'll see it in the description.
This means that due to the flange focal depth or other factor this conversion would be normally unfeasible, but with some compromises (e.g. using a speedbooster adapter) can be made possible.
This means that the flange focal depth should make mounting and using inifinty focus possible, but for some reason there are no adapter rings available or other factors make it unviable.
This means that you won't be able to mount your lens due to mechanical incompatibility or the difference in flange focal depth doesn't make inifinity focus possible. Although numerous lenses can be mounted on cameras without infinity focus, but this cannot be considered actual compatibility.

Additional information for compatible variations:

MF
AF
MA
AA
SB
MAC
TS
manual focus (on the lens, with its own control ring)
autofocus available (AF controlled by the camera body)
manual aperture control (on the lens, with its own control ring)
automatic aperture control (controlled by the camera body)
speedbooster (focal reducer) adapters are available
macro (variable length) adapters are available
tilt-shift (or other flexible) adapters can be used

If you'd like to read more in-depth about compatiblity, you'll need to get familiar with flange focal depth, see this article.