Quickly find another solution:and    

Micro 4/3 body + T2 lens


The T2 lens was designed to be compatible with everything.

The adapter ring is similar to the M42 converters: the T2 thread has a separate ring within the housing, held by three small bolts. These can be loosened with an Allen key, allowing easy adjustment of the optics.

Most T2 lenses project a picture large enough for fullframes, therefore you have to count on a 2* crop facor with an M4/3. This might come in handy, since the T2 lock is mostly used on telephoto lenses, and if the lens has a high enough resolution to project a sharp image on the smaller sensor, you'll get an almost lossless multiplier on the focus. In practice that means that a 300 mm lens will be able to function as a 600 mm (even with the loss in brightness).

Have you found an error, or would you like to share some insight about an item? Feel free to mail it to us, we appreciate your help in improving the site.

Share this solution!


In terms of compatibility, we distinguish four separate categories:

This means that you'll be able to apply the lens on the camera in question with a proper adapter, and full focus range will be available with it (often with aperture control too). If AF is supported, you'll see it in the description.
This means that due to the flange focal depth or other factor this conversion would be normally unfeasible, but with some compromises (e.g. using a speedbooster adapter) can be made possible.
This means that the flange focal depth should make mounting and using inifinty focus possible, but for some reason there are no adapter rings available or other factors make it unviable.
This means that you won't be able to mount your lens due to mechanical incompatibility or the difference in flange focal depth doesn't make inifinity focus possible. Although numerous lenses can be mounted on cameras without infinity focus, but this cannot be considered actual compatibility.

Additional information for compatible variations:

manual focus (on the lens, with its own control ring)
autofocus available (AF controlled by the camera body)
manual aperture control (on the lens, with its own control ring)
automatic aperture control (controlled by the camera body)
speedbooster (focal reducer) adapters are available
macro (variable length) adapters are available
tilt-shift (or other flexible) adapters can be used

If you'd like to read more in-depth about compatiblity, you'll need to get familiar with flange focal depth, see this article.