Quickly find another solution:and    

Nikon 1 body + Canon EF lens


Fortunately the flange focal depth allows conversion.

Fortunately adapters already exist, so you'll be able to use your EF lens on a Nikon 1 camera.

Keep in mind, that the shutter speed of the EF lens is set electronically by the frame. The Nikon 1 will be unable to perform this, because although there are chipped adapters, these are only able to provide focus confirmation, and cannot provide signal transfer/inverter solutions between the lens and the electronics of the machine. This means that there will be no shutter speed control and autofocus, only manual.

Find your adapter here:

Don't forget however that the Nikon 1 system uses a CX sensor, which has an even smaller, 2.7* crop factor than the M4/3 sensors compared to full-frames. This means that using an EF or EF-S lens you'll get a pretty high focal length multiplier (you'll get a smaller image frame)

Have you found an error, or would you like to share some insight about an item? Feel free to mail it to us, we appreciate your help in improving the site.

Share this solution!


In terms of compatibility, we distinguish four separate categories:

This means that you'll be able to apply the lens on the camera in question with a proper adapter, and full focus range will be available with it (often with aperture control too). If AF is supported, you'll see it in the description.
This means that due to the flange focal depth or other factor this conversion would be normally unfeasible, but with some compromises (e.g. using a speedbooster adapter) can be made possible.
This means that the flange focal depth should make mounting and using inifinty focus possible, but for some reason there are no adapter rings available or other factors make it unviable.
This means that you won't be able to mount your lens due to mechanical incompatibility or the difference in flange focal depth doesn't make inifinity focus possible. Although numerous lenses can be mounted on cameras without infinity focus, but this cannot be considered actual compatibility.

Additional information for compatible variations:

manual focus (on the lens, with its own control ring)
autofocus available (AF controlled by the camera body)
manual aperture control (on the lens, with its own control ring)
automatic aperture control (controlled by the camera body)
speedbooster (focal reducer) adapters are available
macro (variable length) adapters are available
tilt-shift (or other flexible) adapters can be used

If you'd like to read more in-depth about compatiblity, you'll need to get familiar with flange focal depth, see this article.